Chris Pye Letter Carving Tool Sets

Avoid rubbing the paper with your hand since you could leave smudges on your wood. Softwoods keep your tools sharp and are easier to work on without breaking. Pick woods such as basswood, butternut, or pine to get started. Make sure there are no warps or defects in the wood you select or else you may have more difficulty carving it.

latters wood carving

Sometimes you can get lettering templates from a office supply, or, an art or drafting supply store. If you’re painting the carved area, leave the paper on. There are three advantages to computer-generated carving patterns.First, you can choose any shape of letter you like. There are thousands of fonts out there, so it’s easy to get the look you want. Second, you can optimize letter sizes instantly on-screen. Any word processing program offers an enormous range of letter sizing options.


I thought it would be fun to try a shape other than a plain rectangle for the sign, and I think it added a lot to it. I have been working wood signs since 2018, however my experience goes further back to my childhood working on wood projects from home decor to home repair. Prior to 2018 my business was rehabbing homes and then creating wood furniture products. My passion is wood signs and how many ways you can create them. There are several ways you can remove the paint or ink from your layout templates or stencils. I have included the below video to assist you in the basics of measuring, placing layout lettering and painting the layout templates or stencils.

  • It’s time to turn that plain piece into a work of art.
  • Some people use the v-tool–starting shallow and going deeper until the “vee” reaches the width of the letter.
  • When completed, these projects will give the user a sense of achievement, and many of these products can be gifted or used as display pieces around the home.

Set the blade depth at 3/8 inch and cut along the letter outlines. Chip the center of the letters out with a hammer and 1/2-inch chisel. Follow up with a sanding drum accessory on a rotary tool to smooth off rough corners and edges. Press the bit into the wood and follow along the outline to carve it out. Hold your piece of wood steady with your non-dominant hand. Push the tip of your rotary tool into the wood to start carving it.

Push down on both handles until the bit cuts into the wood and stops at the preset depth. Begin pushing and pulling the router along as the bit cuts the letter until it’s complete. Use a bench knife, which is a type of woodworker’s carving knife, to trace over the letter outlines to a depth of at least 3/8 inch. Hold the tip of a 3/8-inch bent spoon knife at a 15-degree angle between the bench knife lines. Rock the bent spoon knife back and forth as you push it forward.

Transferring Letters To The Wood

I’d lean towards a 2 or 3,, a straight and a V tool. The V plows the way and establishes the depth and center line of the letter. Then follow up with the 2 or 3 creating the sides of the letter which will end up with a slight inward curvature.

Although a fair bit of concentration and focus is needed when carving letters I find it to be a very mindful and zen like process. Using chisels to shape and craft wood and make it your own is a worthwhile experience for anyone, using natural materials and your own hands to create your own art. Learning how to carve letters into wood with a chisel isn’t as hard as you thought it would be. After you create your piece, it can be perfect for display in your lovely home. You can use it as wall décor, something to display on your nightstand, or you can give it as a gift to your loved ones. Being stuck at home is the best time to find a new hobby.

And third, making computer carving patterns is fast. Keep your fingers away from the end of your rotary tool while it’s spinning. Wear safety glasses while working with at yahoo your rotary tool to protect your eyes. Make sure your rotary tool is unplugged before changing the bits. You can purchase a rotary tool from your local hardware store.

latters wood carving

I have cut letters both through paper and having directly marked the letters on the wood with pencil. Both work but the latter does allow a greater sensitivity to the wood and all the factors discussed so far by Tom. Also, the paper covers grain, texture and imperfections in the wood that you have to deal with while you are carving. As for the patterns, applying paper to wood and cutting through it works, but it is really hard on tools.

Use spray adhesive to attach your pre-printed letters to the wood. Carving letters and numbers is the best way I know of to make wooden items special. Some rotary tools also have a sanding bit that you can use. Work in one direction while you carve your wood or else it might look inconsistent. If your letters aren’t deep in the wood, sanding them too much could make them lose detail. Some hardwoods, such as white oak, can’t be carved unless you use a mallet.

For this project, we chose the Bookman Old Style typeface, which has well-proportioned and attractive letters. PS – I have my first letter and block ready to go, will start on it this evening. One of the most versatile tools in the shop, the humble block plane is essential to Mike Korsak’s production of accurate and precise work. You also need to be able to spin the stock around; it allows you to easily pull the cut towards you.